If you happen to own a 1TB or 500GB Seagate Barracuda hard drive, you’re most likely familiar with the firmware error at boot. So, naturally, what people will do is download the latest firmware update from Seagate to fix the problem.

The only problem with that is that when applied it seems to be bricking the 500GB versions of the drive.

Seagate is very aware of this issue, has taken down the update and is investigating it currently. And I’m quite certain a fix for it will be posted in short order.

See source link below for more information on what’s happening (this is really upsetting a lot of people for obvious reasons).

[Source: Channel Register]

Posted In: Hard Drives, Hardware

If you like this, you might also like...

• When Should You Update Your Firmware?
• Seagate Flips The Bird To Linux With Free Agent Series Hard Drives
• Apple Admits to Hard Drive Problems on MacBooks
• Three 1TB Hard Drives Under $200
• If It isn’t Broke, Don’t Fix It!