The typical tech people put into cars are music players, DVD decks, PNDs (personal navigation devices) and smartphones. And the most annoying thing is how to mount it.

You have seven basic options for mounting tech in a car:

1. Proprietary in-dash
2. Semi-proprietary in-dash
3. In-mirror
4. Gooseneck/Bracket
5. Suction mount to adhesive plate
6. Suction mount to glass
7. Friction mount (a.k.a. "bean bag" mount)

Here’s each one of these in detail.

Proprietary in-dash

This is any tech you buy that is specifically made for in-dash use and the most expensive of the bunch. Ordinarily you’re going to spend at least $400 (installation not included) for one of these setups. Better ones have a DVD player, GPS and options to pair to your phone via Bluetooth.

The major problem with tech of this type is that it suffers from the "last in line" curse. Any tech that is current now (such as on Blackberries and iPhones) won’t be available in the in-dash units until a year or two later. And by that time the tech is already obsolete.

Semi-proprietary in-dash

The difference between this and the fully proprietary in-dash setups is that certain pieces can be taken out and used elsewhere. The one seen above has a 4.3-inch TomTom GPS device that can be removed by a simple click-in/click-out (which means it can also be upgraded easily, avoiding some of the last-in-line curse). It also has a ton of other features. If I were searching for an in-dash solution, I would take this over the fully proprietary any day.

 In-mirror

A rear-view mirror that’s a touchscreen monitor? Believe it. The operating system is Windows CE and there are mounting brackets for Toyota, Honda, Hyundai, Mitsubishi, Ford, Mazda and Chevrolet.

To note: These are not easy to acquire and are usually reserved for builders who buy 100 of them at a time. We’ll see tech like this become more readily available for consumers as time goes on, possibly in the form of a super-thin OLED screen that "sticks" to your mirror without having to swap it out.

 Gooseneck mount

Mounts of this type can either be held in place via a suction to the glass or drilled into the floor. You will either love or hate the gooseneck.

Suction mount to adhesive plate

This is the most convenient option for most people. Automotive GPS makers have got this down pat. For example, when you buy a Garmin GPS, it comes with a plate with adhesive that you can stick to the dashboard. Then you mount the GPS to it with its suction mount. Works well and is certainly better than putting it on the glass.

Suction mount to glass

Whether it’s a gooseneck or other type of mount, suction mounting to glass is an imperfect solution at best, mainly due to the fact it can "take a dive" without warning.

  Friction mount (the "bean bag")

This mount setup sits anywhere and has rubber padding under it to prevent sliding from all over the place.

Which is best for you?

For those who are cheap: Suction mount to glass. Readily available, easy install.

For those who have odd-shaped devices: Gooseneck with adjustable bracket. Ham radio guys have been doing this forever, because a mobile ICOM isn’t the same size as a Kenwood isn’t the same size as a Yaesu, etc.

BONUS TIP for hams: Consider using a gooseneck floor mount that attaches to the passenger seat bolt. No drilling necessary. Takes minutes to install. Cheap and rock-solid. Looks good, too.

For those that want the easiest to use: Use the friction mount. It can be moved from car to car easily and moved anywhere you like at whim. Bear in mind friction mounts come for a variety of different mobile devices including almost all cell phones.

For those that don’t like friction mounts: Use a suction mount to a plate. This is what I use personally because the bean bag liked to jump around when going over things like bumpy railroad tracks – even at slow speed.

For those that like to show off: Use the in-mirror (assuming you can even get one) or in-dash. But remember that this is a very permanent thing. All the rest can be moved from car to car, but not this method. Not easily, anyway. Once it’s in there, it’s really in there if you catch my meaning.