|
I would discourage WD-40 because it can make some kinds of bearingd blow chunks and thats not a good thing also try putting a small peice of electrical tape or duct tape over the center section of the fan so that it doent block any airflow. i had this happen and apparently the extra mass of the tape slows it just enough to prevent vibrations
its worth a try at wirst your out ten minutes and an inch long peice of tape.
Good Luck,
Cuog
__________________
|>Sempron64 3000+ @2450 Mhz and counting||1.5 gb AData V-Series RAM||Biostar TForce6100 skt754 || eVGA 7600GT KO 600 core/803 mem||
|> Dual 1.26 GHz Pentium III || 2GB ECC Registered RAM || 18gb scsi 10 HD||
|