Quote:
|
Originally Posted by cdplayer
Good stuff IntegraGSR! 
This would eliminate having to deal with metal shavings inside the computer cabinet! All of the sites that I went to that talk about adding a fan in your computer box always mentioned the woes of metal shavings.
By the way, how much does this adhesive cost and were can I purchase it?
What size fan is stuck on the inside walls of your computer box?
Based on what you know about the adhesive does it matter what size fan you use?
Thank you for the information IntegraGSR!  |
http://www.glenridgeposse.com/images/DCP_0918.jpg
The picture isn't too glorious but it shows you how large a fan can be held up with just a dab or two of the adhesive. It comes in a little black bottle that says "Plastic Emblem & Trim Adhesive" that I'm sure you could find at any auto part or hardware store. Its specialty is plastic to metal, so this is a perfect application. It shouldn't cost more than $10 and for normal applications should last quite a while.
When I applied it, I actually sat the case on the side it was attached to for a small amount of time so gravity would hold it in place, as it is a little more consistent than a hand. I then turned it back to its normal stance and it's on there firmly and flows air quite nicely.