|
I don't have a manual to my motherboard or hard drive.
I have 2 SATA ports on motherboard and have tried them both neither works.
seagate.com said the jumpers on the hard drive were for factory use only.
A cold boot on my computer does this:
Starts on first page where you can go into cmos
then
Scans IDE drives then says
No Array is Defined............................
Press ctrl - F to enter fast build utility or
press Esc to continue booting........
when you press Esc it goes to
Verifying DMI pool data....................
Boot from CD:
Boot from CD:
Disk boot failure, insert system disk and press enter
Thats it.
|