Never done any real case modding before and wanted start modding for the new rig I'm looking at building. I have a few questions. Is there anything that can be used to cover acrylic to prevent scratching? Whether it be adhesed plastic sheets or spray covering or somthing of that sort. And does anyone know where I could find fan grills with any sort of air filter built in?(my ThermalTake has spoiled me) Here's a link to the
case I'm looking at (you can't see the LEDs in the provided pics, but if you look at the same case with green or blue LEDs they have pics of them on in the dark). Plan on adding fans, cold cathode(s), etching the side panel, and rearranging/removing parts of the case I'm not using. Will throw asus a8n-sli, athlon 64 3700+ san diego, evga 7800gt, 2gb g.skill 2-3-2-5 pc3200, 250gb WD sata II w/ 16m cache, new TT hs & fan for cpu, and case fans. Plan to OC ram and CPU, keep 1:1 divider, RAM to from 400mhz to 500mhz, then cpu from 2.2ghz to 2.75ghz, I've heard that the ram can run DDR500 @ 3-3-2-5, XD.