PCMech Forums - View Single Post - questions about setting up a second drive

gary_hendricks · 02-12-2006, 01:24 AM

Hi glc

I stand corrected.

Since the Raptor is a SATA drive, you need to check the motherboard. On the motherboard there should be a port SATA1 for the primary drive, SATA2 for the secondary drive.

Ignore what I said about master and slave on the primary and secondary IDE channels, since SATA drives don't have jumpers.

02-12-2006, 01:24 AM	#8
gary_hendricks Banned Join Date: Jan 2006 Location: Singapore Posts: 179	Hi glc I stand corrected. Since the Raptor is a SATA drive, you need to check the motherboard. On the motherboard there should be a port SATA1 for the primary drive, SATA2 for the secondary drive. Ignore what I said about master and slave on the primary and secondary IDE channels, since SATA drives don't have jumpers.