PCMech Forums - View Single Post

ricoman · 03-27-2006, 04:27 PM

I'm all set. For anyone who might have the same problem:
Upon rebooting press delete to enter setup program. This will bring you to the Main screen, scroll down to the Primary or Secondary IDE (whichever is giving you the problem) Mine showed the Secondary IDE Slave as "not installed". Click on that, which brings you to another screen. Set it to "Auto". Hit escape to bring you to the previous screen. The Secondary IDE should now show your drive. Go to top, hit exit and save configuration and your done. My 3500 now works like a Champ that it is. Still my most versatile drive thanks to Liggy-Dee's firmware.

03-27-2006, 04:27 PM	#9
ricoman Member (4 bit) Join Date: Mar 2006 Posts: 12	I'm all set. For anyone who might have the same problem: Upon rebooting press delete to enter setup program. This will bring you to the Main screen, scroll down to the Primary or Secondary IDE (whichever is giving you the problem) Mine showed the Secondary IDE Slave as "not installed". Click on that, which brings you to another screen. Set it to "Auto". Hit escape to bring you to the previous screen. The Secondary IDE should now show your drive. Go to top, hit exit and save configuration and your done. My 3500 now works like a Champ that it is. Still my most versatile drive thanks to Liggy-Dee's firmware.