Quote:
|
Originally Posted by TwoRails
Also, if I remember right, everything, except for the FSB, is set in the BIOS, so have you also tried jumpering it back to 333?
|
TR,
I completely forgot about that. I had everything running fine with the jumper set to 200 and my BIOS had the CPU frequency at 187MHz. I just switched it over to 333/266 (which is default) and it is totally fine still, so I guess it doesnt matter and maybe the BIOS updates eliminated that? Anyways, like I mentioned, totally forgot about the jumper. I may try to step up the FSB just a little more in BIOS to see what happens.
The whole deal is the rev 1.04 board has the older nForce chipset which DOES NOT fully support the 400MHz FSB, but you can get it up sometimes to 185MHz or higher in BIOS... The link below is to nForcersHQ Forum and my thread about this topic.
http://www.nforcershq.com/forum/a7n8...--vt65821.html
They shed a lot of light on this subject and I found out quite a bit here since they specialize in nForce based motherboards.
Thanks,
Michael
