PCMech Forums - View Single Post - Where's pin one on va-503+

LawyerRon · 09-28-2001, 08:16 AM

Dimms have an offset "notch" so they can't be installed backwards. A friend used to have that same FIC board and he ran PC100 memory on it. I'm not sure if PC133 will work on that board and I'm also not sure if it will accept a 256 mb Dimm. In other words, make sure the board will actually support the type of memory you're trying to install. Check the manual. If you don't have it, you can d/l it from the FIC site.

09-28-2001, 08:16 AM	#3
LawyerRon The Gavel Join Date: Dec 1999 Location: Upland, CA Posts: 6,311	Dimms have an offset "notch" so they can't be installed backwards. A friend used to have that same FIC board and he ran PC100 memory on it. I'm not sure if PC133 will work on that board and I'm also not sure if it will accept a 256 mb Dimm. In other words, make sure the board will actually support the type of memory you're trying to install. Check the manual. If you don't have it, you can d/l it from the FIC site. __________________ "To speak ill of others is a dishonest way of praising ourselves" Last edited by LawyerRon; 09-28-2001 at 08:21 AM.