PCMech Forums - View Single Post

PardeGT · 10-07-2001, 10:49 AM

Yep, I'm using 1/3 and 2/3 settings for the pci and agp respectively when I'm overclocking. When I get windows set up the way I want it I'll make a ghost of it. Does that take very long?

Also, any info on the stepping of the celeron or memory experiences from the initial post? I checked the abit site but couldn't anything on what system1 and system2 temps are. System2 always runs higher though. I figure system1 is the northbridge and runs cool (30C) because of the fan on it but not sure about system2 it goes up to around (40C) during overcocking. Don't think its the southbridge as it stays cool to the touch.

Thanks guys

10-07-2001, 10:49 AM	#5
PardeGT Mechanical Guru Join Date: Jul 2000 Location: Husker Country Posts: 1,472	Yep, I'm using 1/3 and 2/3 settings for the pci and agp respectively when I'm overclocking. When I get windows set up the way I want it I'll make a ghost of it. Does that take very long? Also, any info on the stepping of the celeron or memory experiences from the initial post? I checked the abit site but couldn't anything on what system1 and system2 temps are. System2 always runs higher though. I figure system1 is the northbridge and runs cool (30C) because of the fan on it but not sure about system2 it goes up to around (40C) during overcocking. Don't think its the southbridge as it stays cool to the touch. Thanks guys __________________ If you really want to understand - try changing it. Sys specs: NZXT Lexa_Asus P5E_E6750 2.66Ghz_GSkill 2GB PC6400_Mushkin 2GB PC6400_WD SE16 250GB_Pioneer 16x slot dvd_Pioneer 16x dvdrw Mitsumi 1.44_ATI x1600pro 512mb_Linksys WRT54GS_Samsung R237W LCD_Altec Lansing 641_WinXP PRO SP2 Last edited by PardeGT; 10-07-2001 at 11:23 AM.