|
I am confused. lets make sure that we are talking the same topology.
Are like this:
#1
internet -- modem -- PC's with printers -- router -- switch --other pcs
or
#2
internet
|
modem
|
router --- pc's with printers (with these attached to switch ports on router)
|
switch (with this attached to open switch port on router)
|
other PC's
=========
if it is #2, then you should have no problems. Install the appropriate printer drivers (if needed) on each PC and they should see them fine. Just make sure that all devices are in teh same DHCP range and the same subnet. (also consider moving the PC's with printers off the router to any open switch ports on the switch)
if it is #1: why set up like that?
|