PCMech Forums - View Single Post - Having problems with a new build? Try this.

Chester · 10-11-2003, 01:46 PM

Hi,
Thanks for the tip. I know this is posted over 2 years ago. But Still helpful.

I just brought a A7N8X Deluxe nForce2 mother board and AMD Athlon XP 2500 and 2 cruical 500 MB ram. a Thermalright SLK-700 heatsick and a Y.S. TECH TMD 70x70x15mm Fan(5800RPM). I used an old PCI video card from my old computer (Diamand ?)

When I put everything together, it would not post. The case fan and CPU will on for 5-10 seconds and stop, there is no beep from the speaker. I switched to another speeker from another machine and still no beep.

I then follow the procedures in this tread and removed everything except for
memory (2), a PCI vedio card, CPU with heatsick and fan. Now the CPU fan will continue to run, but there is no beep and no display signal from PCI Video card

How do you proceed ? Any suggestions ?

thanks in advance.

Chester

10-11-2003, 01:46 PM	#95
Chester Member (2 bit) Join Date: Oct 2003 Posts: 3	help: Having trouble in build a PC with A7N8X mother board Hi, Thanks for the tip. I know this is posted over 2 years ago. But Still helpful. I just brought a A7N8X Deluxe nForce2 mother board and AMD Athlon XP 2500 and 2 cruical 500 MB ram. a Thermalright SLK-700 heatsick and a Y.S. TECH TMD 70x70x15mm Fan(5800RPM). I used an old PCI video card from my old computer (Diamand ?) When I put everything together, it would not post. The case fan and CPU will on for 5-10 seconds and stop, there is no beep from the speaker. I switched to another speeker from another machine and still no beep. I then follow the procedures in this tread and removed everything except for memory (2), a PCI vedio card, CPU with heatsick and fan. Now the CPU fan will continue to run, but there is no beep and no display signal from PCI Video card How do you proceed ? Any suggestions ? thanks in advance. Chester