PCMech Forums - View Single Post

Ob1 · 11-25-2006, 02:01 PM

Clear NVRAM

You can restore the original factory default menu settings by initializing NVRAM.

1. Press Menu.

2. Press until Configure appears, and then press or .

3. Press until Maintenance appears, and then press or .

4. Press until Init NVRAM appears, and then press or .

5. The Init NVRAM Are you sure? message appears on the operator panel. Press .

6. Turn off the printer, and then on again.

11-25-2006, 02:01 PM	#16
Ob1 EGO MY LEGO Join Date: Dec 2004 Location: Tatooine, Binary Star System Posts: 1,740	Clear NVRAM You can restore the original factory default menu settings by initializing NVRAM. 1. Press Menu. 2. Press until Configure appears, and then press or . 3. Press until Maintenance appears, and then press or . 4. Press until Init NVRAM appears, and then press or . 5. The Init NVRAM Are you sure? message appears on the operator panel. Press . 6. Turn off the printer, and then on again. __________________ _______________________________________________________________________ Inspirion 8600/centrino 1.6ghz/1024mb ram/80gb hard drive hitachi/intel pro wireless 2200bg/15.4sxga/Ati 128mb Radeon Mobility 9600/xp pro w/sp2 dimension 4700/P4 2.8ghz 800mhz FSB/1.5 ddr2 ram PC 3200/2X160gb sata maxtor 8mb cache RAID 1/19 in dell flat panel/windows server 2003 Small Business Server standard edition SP1 w/Exchange SP2 Last edited by Ob1; 11-25-2006 at 02:06 PM.