PCMech Forums - View Single Post - Building my first ever PC

Matt Phelps · 11-14-2001, 06:58 AM

Okay - I'll go back through the PC building tutorial and see if I have any questions.

For info, this is the Juno case:

'Superb specification full tower case with 6 x 5.25" and 2 x 3.5" bays concealed behind its flush fitting door. The Juno P6 is twin PSU cabable with removeable 2nd PSU blanking plate and has a convenient swing-out motherboard tray. Cooling potential is superb with no less than 5 x 80mm case fan apertures - 2 front (1 x 80mm fan supplied) and 3 rear.

11-14-2001, 06:58 AM	#3
Matt Phelps Member (7 bit) Join Date: Nov 2001 Location: Surrey, UK Posts: 84	Okay - I'll go back through the PC building tutorial and see if I have any questions. For info, this is the Juno case: 'Superb specification full tower case with 6 x 5.25" and 2 x 3.5" bays concealed behind its flush fitting door. The Juno P6 is twin PSU cabable with removeable 2nd PSU blanking plate and has a convenient swing-out motherboard tray. Cooling potential is superb with no less than 5 x 80mm case fan apertures - 2 front (1 x 80mm fan supplied) and 3 rear.