PCMech Forums - View Single Post - "Not accessible" & "Network path not found" messages

videobruce · 03-05-2008, 07:09 AM

The temporary solution is to use the 2nd adapter on the 2nd MB w/ the different address.

The manufacture suppects a corrupted bios and suggested re-flashing both MBs', but directly in DOS, not through Windows which I did the first time using their "LiveUpdate". Anyway, how could the addresses from one MB transfer to another? The only common link is the router.
There are stickers on the MB w/ each address, but not in hexdecimal and all four addresses are different.

03-05-2008, 07:09 AM	#10
videobruce Member (10 bit) Join Date: Mar 2002 Location: Buffalo NY Posts: 512	The temporary solution is to use the 2nd adapter on the 2nd MB w/ the different address. The manufacture suppects a corrupted bios and suggested re-flashing both MBs', but directly in DOS, not through Windows which I did the first time using their "LiveUpdate". Anyway, how could the addresses from one MB transfer to another? The only common link is the router. There are stickers on the MB w/ each address, but not in hexdecimal and all four addresses are different.