I DID IT!!!
IT WORKS!!!
. I got it all to work, here is what I did.
When I first tried to install the Cel. 2 566 into my friend's mobo. the BE6-II, it didn't work. Then I put in a cel. 400. That worked, but then I would get the beeps. I thought about it for a whole day, then I realized that on the Abit SloKET, everything was on auto
. I set it to 66 bus and 1.5 volts. I put it in the BE6-II and it booted right up.
. Then, I was in windose and it froze, I rebooted and it didn't post. I looked in and saw that the Golden Orb was shaking soo hard that it dislodged the CPU. I figured out there are 2 clip things on the Abit SloKET, so I clicked those and tried to move the CPU. It didn't move so I assumed the Orb wouldn't move it. Then I booted it and it worked. I rebooted 3 times, all cold boots, and they all worked.
. YES!!! Thanks all of you. Could you guys tell me if the little clip things on the SloKET is so the CPU won't pop out of the Slot 1. The clips are on the top and bottom as you are looking at the CPU from the outside when it is on the board. Thanks.
------------------
"I've got thirteen channels of $hit on the T.V. to choose from." - Pink Floyd