PCMech Forums - View Single Post

k9bliss · 05-03-2013, 04:53 PM

Did out of case boot with the old power supply, no go. Hooked up the new power supply and it boot fine. Put everything back in and it seem to be working ok, until I went to use the usb ports. For some reason what ever I hook up to the computer through the usb port nothing happens. Even on the MB. So I rechecked several time to make sure everything was connected properly. Still can't get it to recognize what ever I hook up. I have another computer and tried the items on it's usb port and it came right up. I went in to hardware management, usb seem to be working fine. Got any ideas?

05-03-2013, 04:53 PM	#4
k9bliss Member (8 bit) Join Date: Feb 2006 Posts: 236	Did out of case boot with the old power supply, no go. Hooked up the new power supply and it boot fine. Put everything back in and it seem to be working ok, until I went to use the usb ports. For some reason what ever I hook up to the computer through the usb port nothing happens. Even on the MB. So I rechecked several time to make sure everything was connected properly. Still can't get it to recognize what ever I hook up. I have another computer and tried the items on it's usb port and it came right up. I went in to hardware management, usb seem to be working fine. Got any ideas? __________________ Intell Core 2 Duo,E6750,1333mhz,4MB L2 Cache,LGA 775, 2gig Corsair mem, Sonata II case with Antec 450 watt power sup.Asus P5B-E,H.I.S ATI Radeon HD 4670, Have Maxtor 200 gig SATA X 2. DVD drive and DVD REC. Acer H233H HD 23 inch lcd monitor.