First of all, remove Com 2 from device manager and disable it in CMOS. Then go into the setup/properties for the sound card and see if there is an option to set the Soundblaster emulation to share IRQ with LPT1. If not, no big deal, but if this is the case you *must* disable Com 2 to free up an IRQ.
You didn't tell me which slots your cards were in. So, I will tell you which slots to put them in........
Leave PCI slot 1 open.
Put the sound card in Slot 2.
Put the NIC in slot 3.
Put the modem in slot 4.
|