PCMech Forums - View Single Post

ktkendall · 05-31-2002, 07:51 AM

You just need a little crossover adapter that has a straight thru female-female (barrel) with a litttle usually 4 to 6 inch segmentmthat has the crossover in it! Or if you wanted to cut the end off and put a new end on with crossover in it, you must reverse the positions of the green and orange pairs!

05-31-2002, 07:51 AM	#11
ktkendall Telcom Tech Join Date: Feb 2002 Location: Western, Pa. Posts: 5,409	You just need a little crossover adapter that has a straight thru female-female (barrel) with a litttle usually 4 to 6 inch segmentmthat has the crossover in it! Or if you wanted to cut the end off and put a new end on with crossover in it, you must reverse the positions of the green and orange pairs!