PCMech Forums - View Single Post

nttsorvas · 10-25-2000, 09:45 PM

There is a little piece of the stud left that is holding the orb on still, I tugged at it a little to see if it would fall off with a little movement and surprisingly it stayed on! If it decides to fall off I'll probably JB weld it on, I know the stuff well being an auto mechanic. Thanks for the tip Alfie! much appreciated, I thought about it but was really unsure about attaching it to the cpu for good! As far as the three prong vs two prong, in the manual for the mb, it says something about U11: LM 75 for cpu temp detect, U10 is the Zif socket, I can't find U11 anywhere on the board and the manual doesn't state where it's at. Also it says JP2 is IR connect, I'm not familiar with this, can anyone give any info, you guys are great, thanks for all your help!

10-25-2000, 09:45 PM	#8
nttsorvas Member (5 bit) Join Date: Oct 2000 Posts: 16	There is a little piece of the stud left that is holding the orb on still, I tugged at it a little to see if it would fall off with a little movement and surprisingly it stayed on! If it decides to fall off I'll probably JB weld it on, I know the stuff well being an auto mechanic. Thanks for the tip Alfie! much appreciated, I thought about it but was really unsure about attaching it to the cpu for good! As far as the three prong vs two prong, in the manual for the mb, it says something about U11: LM 75 for cpu temp detect, U10 is the Zif socket, I can't find U11 anywhere on the board and the manual doesn't state where it's at. Also it says JP2 is IR connect, I'm not familiar with this, can anyone give any info, you guys are great, thanks for all your help!