How do you install cabs from Windows?
If I leave adapter card jumper setting to DEFAULT would mobo detect 1.5v or do I need to manually set jumpers for 1.5v? I image o/c comes after everything is installed, right?
Do I need to enable ACPI after installation process? What other settings are usually re-enabled, disabled or changed in BIOS on Intel 440BX boards after installation is completed? Thanks again to all.
Corrrect me here if I am wrong. In this particular board since it is 100FSB design and I am using a 66Mz processor I will be 0/C the processor ONLY when I bring the FSB to 100.
Anything beyond 100FSB and I will be o/c all my other components including my mobo and this is when I need to start changing the ratios for AGP and or RAM depending on the board? I guess this is when it gets a little more complicated stabilitywise?
Is this the same scenario with the CUV4X, when I clock the FSB to 133 on the P3 700E FCPGA? Anything over 133 and I need a real good graphics card + may need to change AGP and or RAM ratios? For instance if you choose a 1/2 AGP ratio running at 140FSB, does it mean you are o/c the video card to 70 FSB? What happens to your other components here:Sound card,modem,monitor and peripherals? Sorry for making this so long and thanks again.
|