PCMech Forums - View Single Post

edrod13 · 01-03-2003, 08:11 PM

Ok,

I was able to succesfully file share between my two PC's a while back with the help of GLC. Everything is still the same except PC2 now has a modem. I want to be able to file share without using TCP/IP over the network so when I am online I wont leave both PC's open to the internet through the nics (I know its dial up but don't laugh). Also, I am online using the internet on one of these PC's at a time depending on which one I want to use, but not on both at the same time nor am I trying to share a connection. The thing is that PC2 is running Win98se and it looks like I cant have seperate protocols for each connection. Here is what I am runnng now.

PC1-win2k

56k modem:

TCP/IP
Client for Microsoft Networks

NIC:

Client for Microsoft Networks
NETBUI
File and Print Sharing for Microsoft Networks

PC2-win98se

56k modem:

TCP/IP
Client for Microsoft Networks

NIC:

HERE IS WHERE I NEED HELP. Can I have seperate protocols bound to separate adapters. If so then I only need the same as PC1 above to file share over NETBUI.

Here is the original post and if you have the time to read it I basically just added a modem in the spare PC.

http://forum.pcmech.com/showthread.p...d13+networking

Thanks

01-03-2003, 08:11 PM	#1
edrod13 Member (11 bit) Join Date: Oct 2000 Location: Yorba Linda, CA Posts: 1,159	Networking my two PC's PART II Ok, I was able to succesfully file share between my two PC's a while back with the help of GLC. Everything is still the same except PC2 now has a modem. I want to be able to file share without using TCP/IP over the network so when I am online I wont leave both PC's open to the internet through the nics (I know its dial up but don't laugh). Also, I am online using the internet on one of these PC's at a time depending on which one I want to use, but not on both at the same time nor am I trying to share a connection. The thing is that PC2 is running Win98se and it looks like I cant have seperate protocols for each connection. Here is what I am runnng now. PC1-win2k 56k modem: TCP/IP Client for Microsoft Networks NIC: Client for Microsoft Networks NETBUI File and Print Sharing for Microsoft Networks PC2-win98se 56k modem: TCP/IP Client for Microsoft Networks NIC: HERE IS WHERE I NEED HELP. Can I have seperate protocols bound to separate adapters. If so then I only need the same as PC1 above to file share over NETBUI. Here is the original post and if you have the time to read it I basically just added a modem in the spare PC. http://forum.pcmech.com/showthread.p...d13+networking Thanks __________________ "Do not worry about your difficulties in Mathematics. I can assure you mine are still greater." - Albert Einstein