PCMech Forums - View Single Post

***glc*** · 01-31-2003, 01:38 PM

Enlight cases use a rail system for the 5.25" bays - you screw a rail onto each side of the drive then slide it into the case from the front. The 3.5" bay is a cage that holds 3 drives which slides in and out on rails, you screw the drives into the cage.

01-31-2003, 01:38 PM	#8
*glc* Forum Administrator Staff Premium Member Join Date: May 2000 Location: Joplin MO Posts: 37,713	Enlight cases use a rail system for the 5.25" bays - you screw a rail onto each side of the drive then slide it into the case from the front. The 3.5" bay is a cage that holds 3 drives which slides in and out on rails, you screw the drives into the cage.