|
Good monitor. When you get it be sure and go to the KDS site and DL the driver pack. KDS uses a little different system for the drivers.
1. Close all open applications.
2. From Windows the Windows desktop, click;
START
Settings
Controll Panel
3. Double click Display Properties
4. Click the Settings tab
5. Click Advanced Properties
6. Click on the Monitor Tab
NOTE:If you don't have a MONITOR tab, refer to ii.a.
section below.
7. Click on Change
8. Click on the Show all Hardware button
9. Click Have Disk
10. Click Browse
11. Double Click on C:
12. Click c:\KDS
13. Click OK
14. Highlight KDS under Manufacturers from the List
15. Click on the Monitor that you have
16. Click Apply
You will get a message "Windows will now Adjust the
Refresh Rate. If the screen becomes garbled wait 10
seconds and your original setting will return.
17. Do You want to Keep these settings Say "YES"
18. Click OK
19. Close
20. Done
|