PCMech Forums - View Single Post - Enermax Case CS-003 Whats the deal?

babylon5guy · 03-12-2003, 11:10 AM

LOL i3OSS I know what you mean, the Enermax case is sure hands above them. Thanks LawyerRon I found those screws. But I did install all the drives without taking it off, it was actually pretty easy. I do like the two fans they give you. Do you have to take it off to remove the second floppy plate? Also is hard matching up those individual USB connetions to the mobo, in all the other cases I've used that is one pin, this has it separated out into a separate pin for each of the 4 pins sticking up out of the mobo, what a pain. I think I'll try an Antec next time.

03-12-2003, 11:10 AM	#5
babylon5guy Member (11 bit) Join Date: Jun 2000 Location: Rochester, NY Posts: 1,250	LOL i3OSS I know what you mean, the Enermax case is sure hands above them. Thanks LawyerRon I found those screws. But I did install all the drives without taking it off, it was actually pretty easy. I do like the two fans they give you. Do you have to take it off to remove the second floppy plate? Also is hard matching up those individual USB connetions to the mobo, in all the other cases I've used that is one pin, this has it separated out into a separate pin for each of the 4 pins sticking up out of the mobo, what a pain. I think I'll try an Antec next time. __________________ Greg 1- Gigabyte GA-P55A; i5-760 CPU; HSF XIGMATEK Gaia SD1283; 8 Gig Corsair XMS DDR 3 1600 Mem; HIS H577FK 1 GB Radeon 5770 VC; Linksys WRT54GL Router; SSD Intel X25-M 80 GIG; WD VelociRaptor 150 GIG; WD 6402AAEX HD; 2 LG SATA DVD Burners; PSU CORSAIR CMPSU-750TX 750W; Win 7 64 Bit; Acer 22" LCD Monitor