PCMech Forums - View Single Post

mike breck · 03-30-2003, 06:58 AM

If you disconnect the Printer from the PC and run a Test Page, does the Test Page show the same symptoms?

If not, that would imply the Printer is OK and you need to look at the drivers, Port setting, or cable...as glc has suggested.

03-30-2003, 06:58 AM	#7
mike breck Member (13 bit) Join Date: Oct 2000 Location: Scotland Posts: 4,700	If you disconnect the Printer from the PC and run a Test Page, does the Test Page show the same symptoms? If not, that would imply the Printer is OK and you need to look at the drivers, Port setting, or cable...as glc has suggested.