|
If you made a duct on the front of your case that went upward, and put a foam, or other filer on the opening, perhaps another on the fan itself, then almost no water would be able to get in through the intake.
A powerful exhaust fan would blow any incoming water away from the case. To minimize the possibility of any water collecting on the center of the fan where the motor is, you could either purchase one of the fans that is driven around the edges by electromagnets (sorry, don't have a link) or put the fan with a duct an inch or two from the cases edge, so the airflow is even by the time it exits the case. Another filter would further insulate the case from water.
The rest of the computer would be sealed somehow, with ruber gaskets, plastic wrap, or whatever.
|