|
All voltage jumpers are on pins 3&4?
The agp pro slot is backward compatible,so is not an issue.
If you notice the front of the slot is plugged,leave it so,the card simply goes in towards the back of the slot,make sure it is and is seated firmly.
You may want to try a different video card (even a pci will do),just to eliminate this as a possibilty.
Make sure the dipswitches for the multipliers are set to off.DSFID 1-6.
If it doesn't take in jumper free mode set the motherboard to jumpered and set the dipswitches and voltage for your cpu and try that.
If the above things get no result,you may have a bumb board or cpu.
|