|
Click on START>RUN and type WINIPCFG when that opens select your NIC adapter in the top window. Then it will show you your IP address and then click the RELEASE ALL button and it will turn the IP's to 0.0.0.0. Then click the RENEW ALL button and it will renew the IP address. You may very well get the same IP back.
To check proxies, go to CONTROL PANEL>INTERNET OPTIONS and click the CONNECTIONS tab at the top. Then click the LAN SETTINGS BUTTON in the lower right and remove all check marks.
To check for hardcoded IP address, go to CONTROL PANEL>NETWORK and scroll down the list until you come to the TCP/IP for your network card. Double click it and it will open the properties and on the GENERAL tab make sure that the OBTAIN IP ADDRESS AUTOMATICALLY is the one selected.
To check the IP address you are getting go back into the router to the WAN and it should show the IP you received. If it is 169.x.x.x, 172.x.x.x, 192.x.x.x or 10.x.x.x then you are not getting an IP from your ISP and will not browse anywhere.
|