PCMech Forums - View Single Post

Floppyman · 05-28-2000, 11:48 AM

Hi,

Double check all your connections....make sure the board is not touching part of the case...also make sure the processor is all the way down...you might have to push a little to get it in....but nothing will happen if it is not firmly seated....Hope this helps...and let us know what you come up with.

05-28-2000, 11:48 AM	#2
Floppyman Member (13 bit) Join Date: Mar 1999 Posts: 6,791	Hi, Double check all your connections....make sure the board is not touching part of the case...also make sure the processor is all the way down...you might have to push a little to get it in....but nothing will happen if it is not firmly seated....Hope this helps...and let us know what you come up with.