PCMech Forums - View Single Post

comp615 · 11-11-2003, 06:25 AM

Umm make sure that it is jumpered correctly. The main one should be set to the Master position in the back, and the scondary one should be set to Slave in the back.

11-11-2003, 06:25 AM	#2
comp615 Member (10 bit) Join Date: Aug 2003 Location: East Lansing, MI Posts: 635	Umm make sure that it is jumpered correctly. The main one should be set to the Master position in the back, and the scondary one should be set to Slave in the back.