Thread: DSL Speed Test
View Single Post
Old 01-10-2004, 10:34 PM   #6
bigandy
Folding For PCMech
 
Join Date: Jun 2003
Location: San Dimas, CA
Posts: 3,136
Kubie, I downloaded DrTCP, but I'm still clueless (forgive me, I'm an idiot)

First, for connection, do I put "normal" or "WinXPppoe" or what.


For normal, this is what I get:
Receive Window (RWIN): 64800
Window Scaling: off
Path MTU Discovery: ON
RFC1323 Window Scaling: OFF
RFC1323 Time Stamping: OFF
Selective Acks: ON
MSS requested: 1440
TTL: unknown
TTL remaining: 113
-------------------------------------------------
Actual data bytes sent: 160400
Actual data packets: 112
Max packet sent (MTU): 1480
Max packet recd (MTU): 1480
Retransmitted data packets: 10
sacks you sent: 28
pushed data pkts: 6
data transmit time: 1.150 secs
our max idletime: 134.5 ms
transfer rate: 85932 bytes/sec
transfer rate: 687 kbits/sec
transfer efficiency: 91%


For WinXPppoe, this is what I get:
Receive Window (RWIN): 64800
Window Scaling: off
Path MTU Discovery: ON
RFC1323 Window Scaling: OFF
RFC1323 Time Stamping: OFF
Selective Acks: ON
MSS requested: 1440
TTL: unknown
TTL remaining: 113
---------------------------------------
Actual data bytes sent: 160400
Actual data packets: 112
Max packet sent (MTU): 1480
Max packet recd (MTU): 1480
Retransmitted data packets: 10
sacks you sent: 28
pushed data pkts: 6
data transmit time: 1.150 secs
our max idletime: 134.5 ms
transfer rate: 85932 bytes/sec
transfer rate: 687 kbits/sec
transfer efficiency: 91%

TIA

Last edited by bigandy; 01-10-2004 at 10:37 PM.
bigandy is offline   Reply With Quote