|
I recently built a computer. Here are the specs:
1.2 gig socket A tbird
256 megs Crucial PC133 CAS2 RAM
45 gig IBM HD
Epox 8KTA3 motherboard
SB Live Platinum sound card
Panasonic DVD
Plextor 12x10x32x CD-RW
All went well and its running really great. I have an old (10 years probably) Panasonic KX-P4410 laser printer that still works well so no need to replace or dump. I installed the drivers with no problem. Whenever I try to print the print is nothing but gibberish and I get an error on the printer itself "RAM overflow U36." Supposedly this occurs when a printer has the default 512K of RAM Panasonic installs at the factory. I had added upon purchase a meg of RAM for a total of 1.5. So I did some research and found out that in this case I would need to change the print quality from 300 dpi to 150 dpi. I did that but the same results occurred. I'm not sure what other printer settings I need to change or disable in order to make it work. I've got a feeling that the system is sending the information so fast the printer can't handle it. Any thoughts?
TIA
jazzgirl
|