PCMech Forums - View Single Post

corosus · 03-17-2004, 02:33 AM

well look at it this way if your printer works on another system than you know it's not a hardware problem. however it sounds like it might be a hardware-problem. (it sounds to my like the wagon isn't moving all the way back and forth. if there is a print utility installed with the printer you might want to try recallibrating it. Also i recommend you have a good look on the inside first and clean off anything that might be obstructing the wagon.

i assume you tried to print a page using another program

03-17-2004, 02:33 AM	#14
corosus Member (10 bit) Join Date: Jan 2002 Location: brussels Posts: 788	well look at it this way if your printer works on another system than you know it's not a hardware problem. however it sounds like it might be a hardware-problem. (it sounds to my like the wagon isn't moving all the way back and forth. if there is a print utility installed with the printer you might want to try recallibrating it. Also i recommend you have a good look on the inside first and clean off anything that might be obstructing the wagon. i assume you tried to print a page using another program Last edited by corosus; 03-17-2004 at 02:51 AM.