PCMech Forums - View Single Post

BARNEY · 03-19-2004, 03:14 AM

Power down and unplug-Try clearing CMOS and taking the CMOS battery out too, and then put it back, and reattach the ATX header to the motherboard. Set optimized defaults in the bios, and try using loose timings to see if that makes a difference. Also monitor you +12v, 3.3v, and +5v rails, they should all be in spec.

03-19-2004, 03:14 AM	#3
BARNEY Member (8 bit) Join Date: Apr 2003 Location: DFW Posts: 233	Power down and unplug-Try clearing CMOS and taking the CMOS battery out too, and then put it back, and reattach the ATX header to the motherboard. Set optimized defaults in the bios, and try using loose timings to see if that makes a difference. Also monitor you +12v, 3.3v, and +5v rails, they should all be in spec.