OK,
Here's the latest:
I tried to get the computer to post with only cpu, vid card, and ram. Nothing. No go. No beeps, nothing on the screen. I tried another stick of ram, same result. Fans spin up fine. Both sticks of ram I tried are working on the computer I'm typing this on. Here's the specs again:
Cely 500 ppga
MSI 6905 Slocket (Supports Dual CPU and Voltage adjust)
Soyo 6BA
Matrox G200
64 meg Kingston PC100 SDRAM
Maybe I have a jumper on the slocket wrong.
Here's what I've set them at:
Voltage: JV0, JV1, JV2, JV3, JV4 all set to AUTO, meaning I jumped pin 1-2 on each.
Single/Dual CPU jumper (J3)left "Open" for single cpu.
Overclocking Jumpers J1/J2:
J1=Short, J2= Short 2-3
This setting is for "cpu define".
(Other choices are 100mhz, 133mhz, & Reserved.
It's like I'm not getting anything from the cpu.
I can't figure this out.
------------------
"To speak ill of others is a dishonest way of praising ourselves"
[This message has been edited by LawyerRon (edited 05-26-2000).]
|