PCMech Forums - View Single Post

Redfallon · 04-14-2004, 01:16 PM

that ram will handle the 2.85V max on your board no problem, try that first, I bet your problem is with the CAS of 2, unless it's specifically rated at that above 200FSB (rare). It's usually better to use manual overclock than the AI on the Asus boards, although not getting POST at 5% is odd....usually you can just go higher with manual

**edit** try relaxing the timings to 2.5-3-3-5 or 2.5-3-3-7 or 2.5-4-4-7 in that order, hopfully you don't have to go with a CAS of 3...but you may to get very far

Lock your AGP/PCI at 66/33 also

04-14-2004, 01:16 PM	#2
Redfallon Resident Intel Fanboy Join Date: Mar 2004 Location: Cincinnati Posts: 1,669	that ram will handle the 2.85V max on your board no problem, try that first, I bet your problem is with the CAS of 2, unless it's specifically rated at that above 200FSB (rare). It's usually better to use manual overclock than the AI on the Asus boards, although not getting POST at 5% is odd....usually you can just go higher with manual edit try relaxing the timings to 2.5-3-3-5 or 2.5-3-3-7 or 2.5-4-4-7 in that order, hopfully you don't have to go with a CAS of 3...but you may to get very far Lock your AGP/PCI at 66/33 also __________________ ...wide is the gate, and broad is the way, that leadeth to destruction, and many there be which go in thereat... Last edited by Redfallon; 04-14-2004 at 01:37 PM.