PCMech Forums - View Single Post

ktkendall · 04-14-2004, 04:09 PM

I would think then that if your network is using the 192.168.1.x scheme, then that is why you can not access this thing. You will need to temporarily adjust your PC to 192.168.0.x where x is not 30. I would make my PC .31 temporarily to gain access and set the repeater to be within range of your 192.168.1.x network than you should be able to set your PC back to original setting and all should be well. Go to command line and type ipconfig to see what your current ip address is..

04-14-2004, 04:09 PM	#6
ktkendall Telcom Tech Join Date: Feb 2002 Location: Western, Pa. Posts: 5,409	I would think then that if your network is using the 192.168.1.x scheme, then that is why you can not access this thing. You will need to temporarily adjust your PC to 192.168.0.x where x is not 30. I would make my PC .31 temporarily to gain access and set the repeater to be within range of your 192.168.1.x network than you should be able to set your PC back to original setting and all should be well. Go to command line and type ipconfig to see what your current ip address is..