PCMech Forums - View Single Post

***glc*** · 05-07-2004, 10:52 PM

Make sure you are using an 80 wire IDE cable and Cable Select jumpering, not master/slave on the primary. Put the hard drive on the black end connector and an optical drive on the center gray connector.

05-07-2004, 10:52 PM	#6
*glc* Forum Administrator Staff Premium Member Join Date: May 2000 Location: Joplin MO Posts: 37,731	Make sure you are using an 80 wire IDE cable and Cable Select jumpering, not master/slave on the primary. Put the hard drive on the black end connector and an optical drive on the center gray connector.