|
ok calm youself, no need to post 4 times in a row.. you should use the edit function since you know how to use it evidently...
the extra cable is for US plugs, or maybe european (?).
'Where is that setting? TRCD? i just see an option with read and write.
i see no settin with just TRCD'
well try setting them both to 3.
'TRCD will have to be set to 3T and in this case, TRP has to be set to 3T as well in order to work properly. Also this PC3700 memory by default runs at 2.7V VDIMM therefore the BIOS will automatically run this memory chip at 2.7V default.'
like i said i think your ram is running at 2.6v (obviously not running automatically at 2.7v), and it requires 2.7v, which would explain why it is not working stably.
you could go to around 252Mhz, with the following timings : 2.5-3-3-7, at 2.9v
at 2.7v you should get around 235fsb with the same timings.
with cas2 (2-3-3-7) you can get about 231/211 with 2.9v/2.7v
|