[glc]

Here's something to think about - I have a customer with a DWL-650+ card in a Win2K notebook (using the D-Link utility of course - 2K doesn't have the ZCU). He's been connecting at home to a DI-714+ router with a 64 bit key and it's been holding its settings. The other day, he got a Linksys WAP54G at the office and wanted to connect to it - he's been connecting wired all along. We set that up to 64 bit also but used a different key (different SSID also). Even with 2 saved profiles, he has to re-enter the key every time he goes from one to the other. I don't know if this is by design or whether there's a setting somewhere that we are overlooking. If you call D-Link and get an answer, please pass it on.

I'm thinking of trying the following..........putting the other network's key in as Key 2 into each profile. This will only work if both networks are using the same key strength and authentication method (we are using shared key on both).

EDIT - I *just* this minute got an e-mail from the customer - he told me that it's now reconnecting at both sites without re-entering the key - go figure!