|
You should be able to autodetect everything and have it work. If you do have to mess with it, use LBA. The 16383 number is not the actual cylinder count, it's a translated count as handled by LBA. If the bios sees them as 30 gig drives using LBA, that's what you want. Make sure you don't have the cylinder limitation jumper enabled on the drives, and if you are using an 80 wire IDE cable you have to use the Cable Select jumpers and determine master/slave by the connectors (Blue to controller, black to master, gray to slave). You will have to press F6 when prompted during Win2000 setup to load the ATA66/100 driver.
|