[mystvearn]

I did little also. Basicly taking a standard Tusnami Casing
http://img.photobucket.com/albums/v3...n/119_1982.jpg

turning it into this
http://img.photobucket.com/albums/v3...n/119_1973.jpg
http://img.photobucket.com/albums/v3...n/119_1975.jpg

Then had a disastrous way of controling the CCFL, which I pryed the PCI slot to fit the switch sensor out, which was not a good idea as well, so I made a DPST switch controlling both front casing and CCFL lights
http://img.photobucket.com/albums/v3...n/100_0072.jpg

The front 3 items from left, DPST switch, Thermaltake fan PSU controller, D-bracket system diagnostics (some MSI thing-weird thing is that it was place on a PCI slot. I don't get it when you are finding errors on your pc and have to check at the back of the case, so I took it forward.

http://img.photobucket.com/albums/v3...n/123_2308.jpg
http://img.photobucket.com/albums/v3...n/123_2307.jpg
Then from this to
http://img.photobucket.com/albums/v3...n/DSCN0855.jpg

Paint-sand paper the CD-rw to get the gloss finish. remove the two knobs, since you cannot close the door without the knobs banging into each other.
Steps:

http://img.photobucket.com/albums/v3...n/124_2411.jpg
http://img.photobucket.com/albums/v3...n/124_2413.jpg
http://img.photobucket.com/albums/v3...n/124_2426.jpg
http://img.photobucket.com/albums/v3...n/124_2433.jpg
http://img.photobucket.com/albums/v3...n/124_2435.jpg
http://img.photobucket.com/albums/v3...n/124_2437.jpg
Previously 2 switches, I changed the other to the DPST switch.

Before and after switch
http://img.photobucket.com/albums/v3...n/100_0075.jpg
http://img.photobucket.com/albums/v3...n/100_0076.jpg

Then Hiding cables, drill holes in the back tray. Pics not updated yet