i am having a probelm with my computer to see here
http://forum.pcmech.com/showthread.p...363#post178363
i tried 1) Remove EVERYTHING from the case
2) Set the motherboard on a non conductive surface. The motherboard box is perfect for this. .DO NOT PLACE THE MOTHERBOARD ON THE STATIC BAG! It can acually conduct electricity! We are going to try and assemble a running system outside of the case.
3) Install the CPU and heat sink.
4) Install the RAM (only install 1 stick for SDRAM, 2 for RDRAM)
5) Install the video card
6) Connect the monitor to the video card.
7) Connect the power supply to the motherboard.
8) Connect power to the power supply
9) Do NOT connect ANYTHING else. Make sure you have the power connector on the CPU fan connected.
10) Use a small screwdriver to momentarily short the power switch connector on the motherboard
and still does not work