Originally posted by highrisemech
Well lets look at the vaiables here.
Where is the board mounted? Are you sure it is not shorting to the case? Is the fan turning on the cpu? Have you tried another stick of known good ram in bank#1? Either way you have to go through the basic process of elimination until you zero in on the culprit. Me I try everthing that is known good on the board until I finally blame the board.
I reseated the board in another case today with 4 risers and each screw has 3 washers on it so I do not believe anything could be shorting out, I did check the back to make sure and I cannot find anything touching.
Yes, the fan on the cpu as well as the case fans are turning. And if it makes a difference all led's light up; power, reset, hdd.
And, yes I did just try all ram slots with a ram stick I am sure is good and I still recieved the same similar errors.