Quote:
|
Originally Posted by netnamakan
For that household item as the template use a standard CD, they are exactly 120mm.
namakan
|
yea its just gunna be a little tough--the top part of my case doesnt come off. im thinkin--find xact center of two sides of the top panel, draw a circle. measure 60mm lines going out up, down, left, right, on it. after all this is done in pencil and it seems that its in the middle, ill take the CD and do a circular sharpie outline of the disc, still on the inside...my only option is to cut it from the inside as the outside has my paint on it. will cutting this way mess stuff up?
Sry, didnt see that kiluminati aready told me not to cut from inside. so i do this with case standin up?
ok, anyway i had a dvd sittin on top of my case so i lined it up where id want the fan--it was centered on the TOP PANEL, but this excluded the 1" or so of the front panel part. i want it centered this way, and with my small PSU it will fit with ease here. thx for all the advice killuminati...im psyched to do this, and it shoudl help temps alot since i have no exhausts now.