View Full Version : hard drive size
jango1968
08-23-2004, 06:50 PM
how do you know how big a hard drive your motherboard can take
mine is a shop bought one i got a few weeks ago, it uses ddr ram and has an agp card port so it is quite a new board but i didnt get a motherboard manual, it has a bios date of 2003 and i am running xp home
what do you recon the limit is ?
above 200mb?
Spartan
08-23-2004, 07:21 PM
If you have SP1 you should be able to use any size HDD, even that new 400 GB monster.
-Spartan
jango1968
08-23-2004, 07:47 PM
think it is the password sticker has 2004 on it
i thought it was the motherboard that makes the decision on the barrier
what about the 137 meg barrier?
Mesaeus
08-23-2004, 07:51 PM
what about the 137 meg barrier? That's why you need SP1.
holocube
08-24-2004, 10:56 AM
The motherboard restricts the bus speed of the disk, not it's size
What is the motherboard model?
jango1968
08-27-2004, 07:31 PM
i checked the win xp and it is service pack 1 but in the past it has been the bios that has limited the size of the drive, how do i tell what maximum size drive the motherboard will take as i havent got a motherboard manual
cheers
Mesaeus
08-27-2004, 11:51 PM
You don't have to check it. Your mainboard is new enough to be able to take any hard drive size. As long as you use an SATA or ATA133 connector, it will work for all current hard disks. Also, you can use Everest (http://www.lavalys.com/products/download.php?pid=1&lang=en) to get the name of your mb.
It's not *guaranteed* that it will break 137 gigs, that's why we need to know the motherboard model.
jango1968
08-29-2004, 07:35 AM
hi guys
the motherboard is a Soltek SL-85MIV4
any help on max hard drive size would be much appreciated
im using win xp service pack 1
David
That board is new enough I'm 99% sure it will go over 137 gigs no problem.
http://www.soltek.com.tw/soltek/download/download_all.php?isbn_st=SL-85MIV4%2FSL-85MIV4-L
You can download bios updates, drivers, and manuals here.
vBulletin® v3.7.4, Copyright ©2000-2009, Jelsoft Enterprises Ltd.