adalgisa
03-02-2005, 08:11 PM
I have a compaq with an ASUS A7V8X-LA motherboard, 480 watt power supply, Via chipset, S3/Unichrome onboard graphics, compaq LCD monitor, running winxp home. Sigh. I got a powercolor radeon 9600 pro graphics card and couldn't get it to work (posted about this in January)...finally gave up & brought it into a local shop, where they tested the card in other machines & found it was defective. They tried an FX 5700 in my computer & it worked fine, so there's nothing wrong with the AGP slot. (they also replaced the 250w psu with the 480w)
It'd been more than a month since I bought the card from Newegg, so I'm RMA'ing the card to the manufacturer -- which they say will take 4 weeks! :(
On unbridled impulse I got a "Mad Dog" radeon 9550 card for $50 last weekend from CompUSA & in a fit of optimism tried to install it.
Uninstalled display adapter using device manager & add/remove programs; Seated card; plugged in cables; turned on. Blah. Disconnected everything, pulled out & reseated card, plugged in cables, turned on. :mad: ; disconnected, pulled out card, reassembled computer, logged on here, beat breast loudly & groaned.
The computer powers on, the fans turn, the little lights in the new psu are pretty blue & red, but the monitor remains on standby, and the computer doesn't continue booting up.
Could I have another faulty card? Am I doing something wrong? I could just take it back to the shop but what could be so difficult about plugging a card into a slot?
It'd been more than a month since I bought the card from Newegg, so I'm RMA'ing the card to the manufacturer -- which they say will take 4 weeks! :(
On unbridled impulse I got a "Mad Dog" radeon 9550 card for $50 last weekend from CompUSA & in a fit of optimism tried to install it.
Uninstalled display adapter using device manager & add/remove programs; Seated card; plugged in cables; turned on. Blah. Disconnected everything, pulled out & reseated card, plugged in cables, turned on. :mad: ; disconnected, pulled out card, reassembled computer, logged on here, beat breast loudly & groaned.
The computer powers on, the fans turn, the little lights in the new psu are pretty blue & red, but the monitor remains on standby, and the computer doesn't continue booting up.
Could I have another faulty card? Am I doing something wrong? I could just take it back to the shop but what could be so difficult about plugging a card into a slot?