Break-in period for a newly built computer?

[cdplayer]

I finished building my first computer today! I am wondering if there is a break-in period once a computer has been built. If so, what is it?

I did a forum search I could not find anything on that topic.

Thanks! :)

[kram 2.0]

Can you be more specific - what do you mean by "break in period"?

Thanks.
kram

[cdplayer]

Can you be more specific - what do you mean by "break in period"?

Thanks.
kram

I guess I am think along the lines of when one buys a car. So should I leave the computer on for so many hours before cutting it off? Should the computer be on for only x number of hours. What should I be looking at during the first 48 hrs?

Thanks for asking! :)

[mikezel]

No, there is no "break-in period necessary". The only thing you might want to check are your temperatures, but other than that, you can just use it as normal.

mike

[cdplayer]

No, there is no "break-in period necessary". The only thing you might want to check are your temperatures, but other than that, you can just use it as normal.

mike

Thanks for replying Mike! :cool:

I would hate to have a melt down after having such a productive day! :D

One build down one more to go…

Cheers! :)

[Staren]

Yep, either go into BIOS or install a program like Motherboard Monitor to see what your temps are. You also might want to take a quick sniff at the Power Supply (yes it sounds weird). Sometimes there will be a little bit of a 'burn-in' on the internal parts of the PSU getting used to being at that temp. So if it smells a little like plastic for a day don't freak. Just do that if it lasts for more then a week or so. Other then that you should be set.

[Cricket]

Folks used to "burn-in" their computers back in the i286 to i486 days (run the computer for 24 hours to see if anything would die), but that's not necessary anymore.

:) Cricket

[cdplayer]

Thanks Staren & Cricket for the tips! :cool:

Staren I will checkout the software. I was just wondering if there was some software available that would monitor the motherboard. Here I go sniffing. :)

Cricket I guess that means I can cut the computer off before going to bed. Thanks! I don't want to wake up in the middle of the night and discover that the condo is on fire!! :D

Thanks guys!

[glc]

A lot of motherboards come with monitoring software (Asus Probe, Intel Active Monitor, etc.) - check the CD.

[cdplayer]

Thanks glc for the info!

What a rip! :mad: There is nothing on the CD that looks a utility that monitors the system. Maybe they have something on their site (Gigabyte). I reviewed the manual, nothing there.

[Antistupid]

Are you sure it's not on the CD? Maybe it's under the utilities folder? If not then you can always use the BIOS to check your temperatures. But there should be a mother utility that come up with the motherboard.

[cdplayer]

Thanks Antistupid!

I will check again! :)

[sigmaseven]

A succesful folding at home run or prime 95 run always helps to alleviate any worries over a new computer. :)

[cdplayer]

A succesful folding at home run or prime 95 run always helps to alleviate any worries over a new computer. :)

Many thanks sigmaseven! :cool:

This is one interesting way making sure ones new computer is functioning well. Get a complete primality test! :) I have only scanned the site info for the Prime 95 software will have to do some in depth reading about both. Sounds very interesting. What I have read I like!

Thanks! :D

[foolishone]

Similarly, you could also run MemTest. I think it also has an option somewhere to max out both the CPU and the RAM. Prime95 and F@H also do that, but are also there to provide a result, whereas MemTest was made specifcally for what you want to do.

http://hcidesign.com/memtest/

^fo

[cdplayer]

Similarly, you could also run MemTest. I think it also has an option somewhere to max out both the CPU and the RAM. Prime95 and F@H also do that, but are also there to provide a result, whereas MemTest was made specifcally for what you want to do.

http://hcidesign.com/memtest/

^fo

This software design by hcidesign is a tool I can certainly use on my new computer build and a older machine I refuse to throw away! I have not overclocked any of my machines but writing bad data to the disk because of faulty memory is no fun! :(

Thanks foolishone! :cool: